PK108-110 Automatic Cards Slitting And Collating Machine (with feeder)

PK108-110 Automatic playing  cards cutting and collating mahcine (with cards feeder)

PK108-110 Automatic playing cards slitting and collating machine

PK108-110 Fully-automatic Cards Slitting And collating Machine Breif Introduction:

 Our company research and development of fully-automatic card sorting machine is mainly used for all kinds of paper cards, playing cards, educational learning cards, etc for slitting, collating ,die cutting, counting,wrapping,not only high efficiency, but also high slitting precision. 

Can be slitting of different specifications of the cards, and ensure the printing before and after collating cards in sequence. It is the ideal equipment for producing cards and paper cards of playing cards, board games and so on. 

The machine's internal electrical components are made of Schneider products imported from France, PLC ,Servo drive & Touch screen use Panasonic,Detla,etc .And the whole process of fully-automatic line is reflected as follows: automatic paper feeding, automatic vertical and horizontal slitting, automatic card collating, automatic cards die cutting,automatic finish. Equipment set light, electricity, gas integration, safe operation, stable performance!

Technical parameters:

Preparation before installation:

FEEDING SHEET SYSTEM:

The main function of the paper feeder is to feed a whole sheet of paper to the main engine continuously, which mainly includes:

1. Feeder head:

Feeder is an important part of the paper feeding machine, the role is to separate the top piece of paper with other paper,then forward conveying.

Adopt the way of four suction and four delivery to ensure that the high weight of mounting cardboard can also be feeding freely.

2. Double sheet controller:

Double-sheet controller function: when the feeder forward conveying paper two or more than two pieces that will automatic alarming to stop.

3. Paper feeding wheels:

The pressure of each paper feeding wheel is adjusted to the same, to ensure the smooth delivery of paper.

4.Turning plate:

When the paper is absorbed by the paper suction nozzle to start forward conveying, the turning plate start forward incline,

After the paper is sent to the pattern roller, the turning plate comes back and stands up.

MAIN SLITTING SYSTEM:

1. Front Gauge,edge pull gauge

The paper is rectangular, and the pull gauge edge distance is equal, their role is to ensure that the paper into the slitting knife, to ensure that the paper and the pull gauge into 90 degrees, to locate the precision of slitting.

2. Inclined rollers/balls

The function of them is that after the paper passes through the first slitting,the paper is conveyed to the second slitting,make sure the paper is close to the rules.

3.Press paper steel plate

Flatten the uneven paper so that the paper smoothly enters the press feeding synchronous belt.

4.Slitting knife rollers

Altogether two groups of bottom knifves, two groups of top knifves. Top slitting knife diviede into two kinds: dental knife & plan knife,the role is to divide the paper into rectangular semi-finished cards.

5. Pressure feeding synchronous belt

Function is feeding cutted paper cards into the cards separate rollers.

6. Separate rollers

Adjust the pressure of the rollers,and rely on the speed difference between the front and back rollers to pull off the paper cards with the connection point, and send it into the collatng groove.

CARDS DIE CUTTING SYSTEM:

1.Die cutting channel:

Through the electric eye induction, the card of the paper receiving slot is sent into the die-cutting channel by the cylinder push paper lever to ensure the orderly positioning of the card before die-cutting

2.Paper orderly cylinder:

After the cards enter the die-cutting channel, it starts to work by relying on the flat paper cylinder to clipping the cards orderly.

3. Hydraulic cylinder:

After the work of the paper  orderly cylinder,

the hydraulic cylinder starts to work, pressing the card in the channel vertically, with a route of 15 cm.

4.Die cutter:

The function is to make the semi-finished product to the card with smooth edges and round corners.

Following photo with cards feeder

Slitter Without cards feeder photos